# Safety Barriers

# 14.01 - Perimeter Safety Panel Mount

---

# Overview

This manual provides instructions for mounting safety panels onto a combination of safety brackets or safety plates.

# Parts

See order of use for [14.01 - perimeter safety panel](https://cloud.instock.com/assets/articles/14.01/manual/)

# Assembly Steps

These are assembly instructions for mounting safety panels onto safety brackets or safety plates. Before mounting safety panels, the following are prerequisites:

1. Grid structural elements are assembled.
2. Safety brackets and/or safety plates are installed.

*Grid cell with installed safety brackets, without safety panel*

## Step 1

Position [14.12 safety panel](https://cloud.instock.com/assets/articles/14.12/) so that holes in safety brackets or plates are aligned with holes in the safety panel as depicted in the image.

*Safety panel positioned onto grid cell*

## Step 2

Fasten [14.12 safety panel](https://cloud.instock.com/assets/articles/14.12/) with 4 pcs of [99.2217 screw](https://cloud.instock.com/assets/articles/99.2217/) and 4 pcs of [99.12 washer](https://cloud.instock.com/assets/articles/99.12/).

*Safety panel mounted onto grid cell*

# Mounting Safety Panel onto Safety Brackets or Safety Plates

Please note that mounting the safety panel onto the safety plate requires fastening the panel from the outside, while the safety bracket requires fastening from the inside, as depicted in the pictures below.

*Safety panel fastened on safety plates*

*Safety panel fastened on safety brackets*