Safety Barriers

14.01 - Perimeter Safety Panel Mount

Overview

This manual provides instructions for mounting safety panels onto a combination of safety brackets or safety plates.

Parts

See order of use for 14.01 - perimeter safety panel

Assembly Steps

These are assembly instructions for mounting safety panels onto safety brackets or safety plates. Before mounting safety panels, the following are prerequisites:

1. Grid structural elements are assembled.
2. Safety brackets and/or safety plates are installed.

Grid cell with installed safety brackets, without safety panel

Step 1

Position 14.12 safety panel so that holes in safety brackets or plates are aligned with holes in the safety panel as depicted in the image.

Safety panel positioned onto grid cell

Step 2

Fasten 14.12 safety panel with 4 pcs of 99.2217 screw and 4 pcs of 99.12 washer.

Safety panel mounted onto grid cell

Mounting Safety Panel onto Safety Brackets or Safety Plates

Please note that mounting the safety panel onto the safety plate requires fastening the panel from the outside, while the safety bracket requires fastening from the inside, as depicted in the pictures below.

Safety panel fastened on safety plates

Safety panel fastened on safety brackets