Instock · 53.29 - upper level internal corner bracing connector
53.29 - upper level internal corner bracing connector
Overview
Assembled view
Assembled 53.29
Exploded view
Exploded-view of 53.29
Parts
See order of use for 53.29 - upper level internal corner bracing connector
Assembly steps
Prerequisites
- fL2 or higher is installed
- central connector is installed
- sandwich panels are installed
Initial position state of 53.29
Step 1
Insert 1 pcs. of 1.5 plywood washer into sandwich panel holes.
Step 2
Position 3.5 spacer as depicted on the picture above.
Step 3
Position 2 pcs. of 10.15 floor plate with countersunk holes as depicted in the picture above.
Step 4
Fasten floor plates with 8 pcs. of 99.73 countersunk screw in designated holes for countersunk screws.
Step 5
Fasten floor plates with 2 pcs. of 99.91035 screw.
Step 6
Position 15.40 bracing bracket as depicted on the image.
Step 7
Position 2 pcs. of 99.91001 washer onto the holes on the bracing bracket and screw in 2 pcs. of 99.29 screw.
Step 8
Position 15.40 bracing bracket as depicted on the image.
Step 9
Add 2 pcs. of 99.91001 washer onto the screws and fasten with 2 pcs. of 99.91008 hex nut.