53.22 - upper level internal straight connector

Overview

See 3D overview of 53.22

Assembled view

Assembled 53.22

Exploded view

Exploded-view of 53.22

Parts

See order of use for 53.22 - upper level internal straight connector

Assembly steps

Prerequisites

1. fL2 or higher is installed
2. central connector is installed
3. sandwich panels are installed

Initial position state of 53.22

Step 1

Insert 4 pcs. of 1.5 plywood washer into sandwich panel holes.

Step 2

Position 3.4 spacer as depicted on the picture above.

Step 3

Fasten floor plates with 8 pcs. of 99.73 countersunk screw in designated holes for countersunk screws.

Step 4

Fasten floor plates with 2 pcs. of 99.91035 screw.

Note: do not tighten the screws before Step 7

Step 5

Position 15.40 bracing bracket as depicted on the image.

Step 6

Position 2 pcs. of 99.91001 washer onto the holes on the bracing bracket and screw in 2 pcs. of 99.29 screw.

Step 7

Position 15.40 bracing bracket on the bottom of the connector as depicted on the image, add 2 pcs. of 99.91001 washer onto the screws and fasten with 2 pcs. of 99.91008 hex nut.